Nylon Wing Nuts

$0.25

Nylon wing nut to secure foot stretcher to foot stretcher track. Comes in packs of 3.

NOTE:

- 1/4”-20 hardware (7/16” wrench) typically used by Vespoli, older Hudsons, Pococks, etc. or boats that typically use a 7/16” wrench.
- M6 hardware (10mm wrench or 4/5mm allen wrench) typically used by new Hudsons, Empacher, Wintech, Resolute, etc. or boats that typically use a 10mm wrench or 4mm/5mm allen wrench.

**When in doubt use wrench size to determine hardware size.**

NOT SUGGESTED FOR USE ON RIGGERS. SLIGHT LOOSENING COULD CAUSE RIGGERS TO RATTLE AND RIGGER HOLES ON THE BOAT TO EXPAND.

Size:

M6 1/4"-20

Quantity:

Add To Cart

Nylon wing nut to secure foot stretcher to foot stretcher track. Comes in packs of 3.

NOTE:

- 1/4”-20 hardware (7/16” wrench) typically used by Vespoli, older Hudsons, Pococks, etc. or boats that typically use a 7/16” wrench.
- M6 hardware (10mm wrench or 4/5mm allen wrench) typically used by new Hudsons, Empacher, Wintech, Resolute, etc. or boats that typically use a 10mm wrench or 4mm/5mm allen wrench.

**When in doubt use wrench size to determine hardware size.**

NOT SUGGESTED FOR USE ON RIGGERS. SLIGHT LOOSENING COULD CAUSE RIGGERS TO RATTLE AND RIGGER HOLES ON THE BOAT TO EXPAND.

Nylon wing nut to secure foot stretcher to foot stretcher track. Comes in packs of 3.

NOTE:

- 1/4”-20 hardware (7/16” wrench) typically used by Vespoli, older Hudsons, Pococks, etc. or boats that typically use a 7/16” wrench.
- M6 hardware (10mm wrench or 4/5mm allen wrench) typically used by new Hudsons, Empacher, Wintech, Resolute, etc. or boats that typically use a 10mm wrench or 4mm/5mm allen wrench.

**When in doubt use wrench size to determine hardware size.**

NOT SUGGESTED FOR USE ON RIGGERS. SLIGHT LOOSENING COULD CAUSE RIGGERS TO RATTLE AND RIGGER HOLES ON THE BOAT TO EXPAND.